LevelOne GSW-2600TXM - Manual (Page 70)

70
Add Routing Entry
=================
Destination Address: 0.0.0.0
Destination Mask : 255.255.255.0
Next Hop : 0.0.0.0
Routing Metric : 0
Destination IP address. |
READ/WRITE
Use or arrow keys to move, other keys to make changes.
2.5.6.5.Configuring the Default Route
Defines the router to which this switch will forward all traffic for unknown networks. The
default route can be learned from RIP protocol (chapter 2 “Configuring RIP”) or
manually configured. If the switch does not contain a default route, any packet that does
not match an entry in the routing table (chapter 2 “Routing Table”) will be dropped. To
manually configure a default route, enter the next hop in the following table.
Default Route Menu
==================
VLAN : ----
Next Hop Address : 0.0.0.0
Metric : 0
Enter Next Hop IP address. |
READ/WRITE
Use or arrow keys to move, other keys to make changes.
Parameter Description