LevelOne GSW-2600TXM - Manual (Page 46)

46
GMRP Enabled Enables or disables GMRP for this port. When enabled, this port
will allow endstations to register with multicast groups using
GMRP.
Note that GMRP must be enabled for the switch before this
setting can take effect (chapter 2 “Configuring Global Bridge
Settings”).
IGMP and IGMP Snooping also provide multicast filtering. (See
“IGMP Protocol” on chapter 4.)
Ingress
Filtering
4
Disabled If enabled, incoming frames for VLANs which do not include this
ingress port in their member set will be discarded at the ingress
port.
4. This control does not affect VLAN independent BPDU frames, such as GVRP or STP.
However, they do affect VLAN dependent BPDU frames, such as GMRP.
2.5.4.2.VLAN Table Configuration
Use this screen to create a new VLAN or modify the settings for an existing VLAN.
VLAN Menu: VLAN Table Configuration
=========
Port 1 2
VLAN 12345678901234567890123456
1 SSSSSSSSSSSSSSSSSSSSSSSSSS -:
Normal
S:
Static
R:
Reg. Fixed
X:
Forbidden
Page : 1 Total: 1 Pages
Enter page number than press 'Apply' to see VLAN group. |
READ/WRITE
Use or arrow keys to move, other keys to make changes.
Parameter Description
VLAN
The ID for the VLAN currently displayed.
Range: 1-4094