Protocol configuration – LevelOne GSW-2600TXM User Manual
Page 57
57
Subnet Configuration: Modify DVMRP Configuration
====================
Metrics: : 1
Probe Interval (in seconds) : 10
Neighbor Timeout (in seconds): 35
Metrics.
| READ/WRITE
Use
Parameter Default Description
Metrics
1 hop
This value is used to select the best reverse path to networks that
are connected directly to an interface on this switch.
Range: 1-31 hops
Probe
Interval
10
seconds
The interval between sending neighbor probe messages to the
multicast group address for all DVMRP routers.
Range: 5-30 seconds
Neighbor
Timeout
35
seconds
The interval to wait without hearing from a DVMRP neighbor
before declaring it dead. This is used for timing out routes, and
for setting the children and leaf flags.
Range: 10-8000 seconds
Note:
IGMP is automatically enabled / disabled along with DVMRP. (See “IGMP
Protocol” on chapter 4.)
2.5.6.2.Protocol Configuration
Use the Protocol Configuration screen to globally enable or disable unicast or multicast
routing protocols for the switch.