LevelOne GSW-2600TXM - Manual (Page 31)

31
Layer 2 Menu
============
Port Configuration ...
Mirror Port Configuration ...
Port Trunking Configuration ...
Static Unicast Address Configuration ...
Static Multicast Address Configuration ...
Change the system port configuration.
Use or arrow keys to move. to select.
Menu Description
Port Configuration
Enables any port, enables / disables flow control, and
sets communication mode to auto-negotiation, full
duplex or half duplex.
Mirror Port Configuration Sets the source and target ports for mirroring.
Port Trunking Configuration Specifies ports to group into aggregate trunks.
Static Unicast Address Table Used to manually configure host MAC addresses in the
unicast table.
Static Multicast Address Table Used to manually configure host MAC addresses in the
multicast table.
2.5.2.1.Configuring Port Parameters
Use the Port Configuration menu to display or set communication parameters for any
port or module on the switch, including administrative status, auto-negotiation, default
communication speed and duplex mode, as well as flow control in use.