Lexmark 436 - Manual (Page 119)

Menu item Description
TCP/IP
Enable DHCP
Enable AutoIP
Enable FTP/TFTP
Enable HTTP Server
Yes
No
Lets you view or change the settings
Note: Yes is the factory default setting for each.
TCP/IP
WINS Server Address
Lets you view or change the setting
Note: This is a four
‑field IP address.
TCP/IP
Enable DDNS
Enable mDNS
Lets you view or change the settings
Note: Yes is the factory default setting for both.
TCP/IP
DNS Server Address
Lets you view or change the setting
Note: This is a four
‑field IP address.
IPv6 menu
Use the following menu items to view or set the Internet Protocol version 6 (IPv6) information.
Note: This menu is available only for network models or printers attached to print servers.
This menu is available from the Network/Ports menu:
Network/Ports > Standard Network or Network > Std Network Setup or Net Setup > IPv6
Menu item Description
Enable IPv6
On
Off
Enables IPv6 in the printer
Note: On is the factory default setting.
Auto Configuration
On
Off
Specifies whether the network adapter accepts the automatic IPv6
address configuration entries provided by a router
Note: On is the factory default setting.
View Hostname
View Address
View Router Address
Lets you view the current setting
Note: These settings can be changed only from the Embedded Web
Server.
Enable DHCPv6
On
Off
Enables DHCPv6 in the printer
Note: On is the factory default setting.
Wireless menu
Use the following menu items to view or configure the wireless internal print server settings.
Note: This menu is available only for models able to be connected to a wireless network.
Understanding printer menus 119