Lexmark 436 - Manual (Page 62)

Source or process Print side Paper orientation
Two
‑sided printing from
trays
Printed letterhead design
is placed faceup. The top edge of the sheet with the logo is placed at the front of the
tray.
One
‑sided printing using
the multipurpose feeder
or manual feeder
Preprinted letterhead
design is placed faceup. The top edge of the sheet with the logo should enter the multipurpose
feeder or manual feeder first.
Two
‑sided printing using
the multipurpose feeder
or the manual feeder
Preprinted letterhead
design is placed
facedown. The top edge of the sheet with the logo should enter the multipurpose
feeder or manual feeder last.
Note: Check with the manufacturer or vendor to determine whether the chosen preprinted letterhead is acceptable for
laser printers.
Tips on using transparencies
Print samples on the transparencies being considered for use before buying large quantities.
Printing 62