Appletalk menu – Lexmark 436 User Manual
Page 120
This menu is available from the Network/Ports menu:
Network/Ports > Network
Menu item
Description
Network Mode
Infrastructure
Ad hoc
Specifies the network mode
Notes:
•
Infrastructure mode lets the printer access a network using an
access point.
•
Ad hoc is the factory default setting. Ad hoc mode configures the
printer for wireless networking directly between it and a computer.
Compatibility
802.11n
802.11b/g
802.11b/g/n
Specifies the wireless standard for the wireless network
Note: 802.11b/g/n is the factory default setting.
Choose Network
Lets you select an available network for the printer to use
Note: If the network you want to join is protected by a security setting,
you will have to join it from the Embedded Web Server or the Wireless
Setup Utility.
View Signal Quality
Lets you view the quality of the wireless connection
View Security Mode
Lets you view the encryption method for the wireless connection.
“Disabled” indicates that the wireless network is not encrypted.
AppleTalk menu
Menu item
Description
Activate
Yes
No
Activates or deactivates AppleTalk support
Note: Yes is the factory default setting.
View Name
Shows the assigned AppleTalk name
View Address
Shows the assigned AppleTalk address
Set Zone
network>
Provides a list of AppleTalk zones available on the network
Note: The factory default setting is the default zone for the network. If no
default zone exists, the zone marked with an * is the factory default setting.
Understanding printer menus
120