Scanner jam access cover open, Toner is low, Unsupported usb device, please remove – Lexmark 436 User Manual
Page 180: Unsupported usb hub, please remove, Usb/usb
Scanner Jam Access Cover Open
Close the bottom ADF door to clear the message.
Toner is low
Try one or more of the following:
•
Replace the toner cartridge.
•
Press
to clear the message and continue printing.
Unsupported USB device, please remove
Remove the unrecognized USB device.
Unsupported USB hub, please remove
Remove the unrecognized USB hub.
Some USB flash drives have a built
‑in USB hub, and these flash drives are not supported.
USB/USB
The printer is using a USB cable connection. The USB port is the active communication link.
Waiting
The printer has received data to print, but is waiting for an End
‑of‑Job command, a Form Feed command, or additional
data.
•
Press
to print the contents of the buffer.
•
Cancel the current print job.
Waiting for redial
The printer is waiting to redial the fax number. Wait for the message to clear.
31.yy Replace defective or missing cartridge
The toner cartridge is either missing or not functioning properly.
Try one or more of the following:
•
Remove the toner cartridge, and then reinstall it.
•
Remove the toner cartridge, and then install a new one.
34 Short paper
The printer paper size setting did not match the length of the paper that entered the printer.
Troubleshooting
180