Lexmark 436 - Manual (Page 83)

Equipment and service options Fax connection setup
Connect directly to the telephone line See “Connecting to an analog telephone line” on page 83
Connect to a Digital Subscriber Line (DSL or ADSL)
service See “Connecting to a DSL service” on page 83.
Connect to a Private Branch eXchange (PBX) or
Integrated Services Digital Network (ISDN) system See “Connecting to a PBX or ISDN system” on page 84.
Use a Distinctive Ring service See “Connecting to a distinctive ring service” on page 84.
Connect to a telephone line, telephone, and answering
machine See “Connecting the printer and a telephone or answering machine
to the same telephone line” on page 85
Connect through an adapter used in your area See “Connecting to an adapter for your country or region” on
page 86.
Connect to a computer with a modem See “Connecting to a computer with a modem” on page 90.
Connecting to an analog telephone line
If your telecommunications equipment uses a US
‑style (RJ11) telephone line, then follow these steps to connect the
equipment:
1 Connect one end of the telephone cable that came with the printer to the printer LINE port .
2 Connect the other end of the telephone cable to an active analog telephone wall jack.
Connecting to a DSL service
If you subscribe to a DSL service, then contact the DSL provider to obtain a DSL filter and telephone cord, and then
follow these steps to connect the equipment:
1 Connect one end of the telephone cable that came with the printer to the printer LINE port .
2 Connect the other end of the telephone cable to the DSL filter.
Note: Your DSL filter may look different than the one in the illustration.
Faxing 83