Lanier AP3200 - Manual (Page 85)

Adding Staples
71
4
Adding Staples
When “Add Staples” appears on the
panel display, the staples have run
out. Follows these steps to add a new
staple refill.
Note
❒ After adding the staple refill, sta-
ples might not be ejected for the
first few times.
A
Remove the empty cartridge.
SR510 (500–sheet finisher)
A Open the rear cover of the fin-
isher.
B Remove the empty cartridge.
SR720 (1000–sheet finisher)
A Open the front cover of the fin-
isher.
B Remove the empty cartridge.
B
Remove the empty refill case as
shown in the illustration.
ZDEX020E
ZDEX030E
ZAEH180E
ZAEH181E
ZAEH190E