Specifying a custom paper size for the bypass tray – Lanier AP3200 User Manual
Page 52
Paper and Other Media
38
3
F Press {{{{Enter #}}}}.
The following message appears
on the panel display.
Bypass Size:
Standard Size
G Press {{{{Enter #}}}}.
The currently selected paper
size appears on the panel dis-
play.
Standard Size:
*11 x 8 1/2
Note
❒ An asterisk (“*”) prefixes the
currently selected item.
H Press {{{{T
T
T
T}}}} or {{{{U
U
U
U}}}} to select the
standard size.
I Press {{{{Enter #}}}}.
The following message appears
on the panel display.
Standard Size:
*8 x 13
J After the panel display chang-
es, press
{{{{Menu}}}}.
The panel display returns to the
ready condition as follows:
Ready
Specifying a Custom Paper
Size for the Bypass Tray
Important
❒ The paper size selected with the
printer driver overrides the one se-
lected here.
❒ When you set custom size or thick
paper in the bypass tray, do not
stack paper above the lower limit
mark of the bypass tray.
A
Press
{{{{Menu}}}}.
The following message appears on
the panel display.
Main Menu:
Sample Print
B
Press
{{{{T
T
T
T}}}} or {{{{U
U
U
U}}}} until the follow-
ing message appears.
Main Menu:
Job Control
C
Press
{{{{Enter #}}}}.
The following message appears on
the panel display.
Job Control:
Paper Input
D
Press
{{{{Enter #}}}}.
The following message appears on
the panel display.
Paper Input:
Tray Priority
E
Press
{{{{T
T
T
T}}}} or {{{{U
U
U
U}}}} until the follow-
ing message appears.
Paper Input:
Bypass Size