Completing the installation, Connecting the cables, Completing – Lenovo RD210 User Manual

Page 127: Installation, Connecting, Cables

background image

1

Operator

information

panel

cable

2

Operator

information

panel

connector

4.

Install

the

cover

(see

5.

Slide

the

server

into

the

rack.

6.

Reconnect

the

power

cords

and

any

cables

that

you

removed.

7.

Turn

on

the

peripheral

devices

and

the

server.

Completing

the

installation

To

complete

the

installation,

complete

the

following

steps:

1.

If

you

removed

any

air

baffles,

reinstall

them

now

(see

2.

If

you

removed

the

cover,

replace

it

(see

3.

Install

the

server

in

the

rack

cabinet

(see

the

Rack

Installation

Instructions

that

come

with

the

server

for

instructions).

4.

Reconnect

the

cables

and

power

cords.

5.

Update

the

server

configuration

(see

configuration”

6.

Slide

the

server

back

into

the

rack,

if

necessary.

Connecting

the

cables

The

following

illustration

shows

the

locations

of

the

input

and

output

connectors

on

the

front

of

the

server.

Chapter

5.

Installing

optional

devices

and

replacing

customer

replaceable

units

111

This manual is related to the following products:

ThinkServer RD210