Installing the cd/dvd cable, Installing, Cd/dvd – Lenovo RD210 User Manual

Page 114: Cable

background image

2.

Turn

off

the

server

and

peripheral

devices

and

disconnect

all

power

cords.

3.

Remove

the

cover

(see

4.

Remove

the

fans

in

fan

connectors

2,

3,

and

4

(see

5.

Remove

the

CD/DVD

drive.

6.

From

the

front

of

the

server,

grasp

the

cable

connector

latch

1

and

slide

it

up

toward

the

fan

bracket;

then,

press

the

spring

latch

2

(right

of

the

cable

connector)

and

slide

the

cable

connector

to

the

right.

7.

Remove

the

cable

from

the

optical

drive

cage

connector

and

set

it

aside.

8.

If

you

are

instructed

to

return

the

CD/DVD

drive,

follow

all

packaging

instructions,

and

use

any

packaging

materials

for

shipping

that

are

supplied

to

you.

Installing

the

CD/DVD

cable

To

install

the

CD/DVD

cable,

complete

the

following

cable:

1.

Read

the

safety

information

in

and

“Installation

2.

Turn

off

the

server

and

peripheral

devices

and

disconnect

all

power

cords

and

external

cables.

3.

Align

the

cable

connector

with

the

connector

on

the

rear

of

the

optical

drive

cage

and

press

the

cable

connector

into

the

optical

drive

cage

connector

until

it

is

firmly

seated.

4.

Pull

the

cable

connector

latch

up

and

hold

it

there

while

you

slide

the

cable

connector

to

the

left;

then,

slide

the

cable

connector

latch

down

to

lock

the

cable

in

place.

98

ThinkServer

RD210

Types

3795,

3796,

3818,

and

3819:

Installation

and

User

Guide

This manual is related to the following products:

ThinkServer RD210