KTI Networks KSD-800M - Manual (Page 59)

-59-
QoS Global Settings Description
802.1p high priority threshold 802.1p High Priority Tag Setting for 802.1p classification
Valid values : 0 - 7
Egress service policy Weighted Round Robin ratio:
4:1 - 4 high priority packets then 1 low priority packet
8:1 - 8 high priority packets then 1 low priority packet
16 :1 - 16 high priority packets then 1 low priority packet
Always high first - Packets in high priority queue are sent first
until the queue is empty
Specific DSCP(A) Enable - Enable user defined DSCP(A) checking
Disable - DSCP(A) classification is not applied.
Specific DSCP(A) Value Enter user defined DSCP(A) value for classification.
Specific DSCP(B) Enable - Enable user defined DSCP(B) checking
Disable - DSCP(B) classification is not applied.
Specific DSCP(B) Value Enter user defined DSCP(B) value for classification.
Specific IP & Mask (A) If a received IP packet ’ s source address or destination address
belongs to the user defined IP network addresses. The packet is
classified as high priority.
Enable - Enable user defined IP(A) network address checking
Disable - IP(A) classification is not applied.
Specific IP Address (A) Enter user defined IP(A) address for classification.
Specific Mask (A) Enter user defined IP(A) subnet mask for classification.