KTI Networks KSD-800M - Manual (Page 52)

-52-
Trap Manager Settings Description
IP Address Specify the IP address of the trap manager to which the switch will
send Snmp traps when predefined events occur.
Community Community string used together with the trap messages sent to the
trap manager
<> Button to add a new trap manager (specified by an IP and Commu-
nity) into manager list
Remove Button to remove the trap manager
Enable Link Change Trap Button to enable the switch to send a trap when any port link
changes
Enable Login Failure Trap Button to enable the switch to send a trap when any login failure is
detected
5.4.2 Port Controls
Port Settings Description
Port Specify the ports for the new settings.
More than one port can be configured at the same time. Use key
and key to specify multiple ports.
Port Function Enable port transmission function, options:
N - unchanged
Enable - enable the port function
Disable - disable the port function
Auto Negotiation Enable auto negotiation function, options:
Null - unchanged
Enable - enable the port auto-negotiation function
Disable - disable the port auto-negotiation function and use forced mode