KTI Networks KSD-800M - Manual (Page 13)

-13-
Software Management Functions
Interfaces Web, telnet, SNMP MIB-II & private MIB, Traps
Management objects Port configuration control and status
Username and password settings
IP, SNMP related settings
VLAN function settings
QoS function setting
Port Configuration Control Function
Configuration P1 ~ P6
Port control function Port TX/RX - enable, disable
Port mode - Auto (auto-negotiation), Forced
Port speed - 100Mbps, 10Mbps
Port duplex - full, half
Port Status Port mode, link, speed, duplex
VLAN Function
VLAN groups 8 groups
Global Settings VLAN Mode - Port-based, 802.1Q Tag Aware VLAN
Ingress member port filtering mode
VLAN Group Settings 12-bit VLAN ID
Member ports
Per Port Settings Default VLAN group index
Unmatched VID packet ingress filtering mode
Egress Tagging Rules
Null VID replacement mode (Egress)
QoS Function
Priority level 2, High priority and Low priority
Priority classifications Port-based priority mode (per port setting)
802.1p classification (per port setting)
Default IP DSCP classification (per port setting)
2 user defined DSCP match classification (global)
2 user defined IP network address match classification (global)
802.1p priority tag Threshold tag value setting for high priority (0 ~ 7)
Egress service policy Weighted round robin ratio : 16:1, always high first, 8:1, 4:1