KTI Networks KSD-800M - Manual (Page 54)

-54-
Global Settings Description
VLAN
VLAN Select Enable VLAN - Enable switch VLAN function
Disable VLAN - disable switch VLAN function
Ingress Rules
802.1Q tag aware VLAN Enable - Under this mode, the switch will check the content of
every received packets. For 802.1Q tagged packets, the tagged
VID on the packet is used to look up the VLAN group table and
find the group whose VID matches the packet
’ s tagged VID.
Disable - Under this mode, the switch does not check the contents
of the received packets. The default VLAN group indexed by the
ingress port is used directly for further VLAN operation.
Ingress member filtering Mode Enable - Drop packet if the ingress port is not the member port of
the found VLAN group
Disable - ingress member filtering rule is not applied
VLAN Group Configuration