Konica Minolta DiMAGE E201 - Manual (Page 95)

- 95 -
TECHNICAL SPECIFICATIONS
Specifications are based on the latest information available at the time of printing and
are subject to change without notice.
CCD type: 1/1.75 inch-type interline CCD with 2.3 million pixels
Focal length: 8.2mm (equivalent to a 38mm lens in 35mm format)
Lens construction: 5 elements in 4 groups
(includes 3 elements with 4 aspheric surfaces)
Aperture: ƒ/3.0
Focusing range: 0.6m to infinity (0.3m to 0.6m in macro mode)
Viewfinder: Reversed Galilean finder
LCD monitor: 46mm 1.8 type colour LCD
Shutter: CCD electronic shutter and mechanical shutter
Shutter speeds: 1/500 - 2 sec.
Focusing method: Video AF system
(Focus preset to 2m in movie-recording mode)
AF/AE lock: By pressing the shutter-release button halfway down
Metering: Centre-weighted
Exposure control: Programmed AE
Exposure comp:
–2EV to +2EV in 0.5 increments
Flash range: 0.6m to 2.5m (normal ISO setting)
0.6m to 5m (high ISO setting)
Flash modes: Autoflash, fill flash, flash cancel, autoflash with red-eye
reduction, fill flash with red-eye reduction
Flash sync: 1/125 sec.
Continuous drive: 1 frame per second (approx.)
Self-timer:
10 seconds (approx.)
Remote control: IR remote control RC-3 (sold separately)
Movie recording: QVGA: 320 X 240 pixels per frame at approximately15 fps.
White balance: Automatic, manual (preset - daylight, fluorescent, tungsten)
Digital zoom: X1.4 - 1280 X 856 pixels, X2.0 - 896 X 600 pixels
Number of pixels: 1796 X 1200 (full-size image), 800 X 600 (half-size image)
Image file format: Exif 2.1 (JPEG, TIFF) conforms to DFC 1.0 and supports
DPOF printing ver. 1.1. Motion JPEG (AVI)
Recording media: Type 1 CompactFlash card
PC interface:
USB 1.1 (mass-storage class)
Video output: Two selectable standards: NTSC and PAL
Batteries: Four AA batteries (alkaline or Ni-MH)
External power: 6V DC with specified AC adaptor (sold separately)
Dimensions: 114 (W) X 65 (H) X 45 (D) mm
Weight: 210g (approx.) without batteries or recording media