Konica Minolta DiMAGE E201 - Manual (Page 49)

If “HARD” or “SOFT” is selected, the sharpness indicator
(SHARP) will appear on the data panel. The sharpness
setting will be reset to “NORMAL” when the camera is turned
off.
- 49 -
SHARPNESS
The sharpness of the images can be altered. This must be set before the image is
recorded. Three sharpness options are available: HARD, NORMAL, and SOFT.
HARD:
NORMAL:
SOFT:
increases the sharpness of the image, accentuating details.
no filter applied.
softens the image, smoothing fine detail
Data Panel Display
CAMERA SENSITIVITY (ISO)
In photography, ISO is used to indicated the sensitivity of the film. The CCD used in
this camera has an equivalent sensitivity of ISO 85. By changing this setting, the
camera sensitivity can be increased four times to an equivalent of ISO 340. This
extends the camera’s performance by allowing images to be taken in low-light situa-
tions and indoor locations without flash, as well as extending the flash range.
The ISO setting is not reset when the camera is turned off. It must be reset manually. A
change in ISO is not indicated on the data panel or LCD monitor. For optimum results
under normal lighting conditions, set the ISO to “NORMAL.”
0.6m - 2.5m (2 ft. - 8.2 ft.)
0.6m - 5.0m (2 ft. - 16.4 ft.)
ISO setting
Normal
High
Film-speed
equivalent
ISO 85
ISO 340
Flash range