Konica Minolta DiMAGE E201 - Manual (Page 26)

TAKING PICTURES
- 26 -
SETTING THE CAMERA IN RECORDING MODE
Setting the camera to recording mode is simple. Turn
the function dial to single-frame advance (
), and
move the lens cover slide to to open the lens cover
and turn on the camera.
• The LCD monitor will automatically
activate.
• To conserve battery power, the LCD
monitor can be turned off using the
display/enter button. The display/enter
button can be pressed again to
reactivate the monitor.
LCD MONITOR DISPLAY (Recording Mode)
Information about camera settings will appear on the LCD monitor for five seconds
when the monitor is turned on or when the recording mode is changed. This information
will also appear when setting the flash mode, digital zoom, or exposure-compensation
value. When the camera is set in the autoflash mode, no flash-mode icon is displayed
on the LCD monitor.
Recording mode p. 37 Flash mode p. 30
Digital zoom p. 36
Magnification factors
X1.0 / X1.4 / X2.0
Exposure-compensation value
(From -2.0 to +2.0 in 0.5 increments) p. 34 Frame counter
(The frame counter displays the number of
images on the CompactFlash card.)
SINGLE
+1.5 18
X1.4