Konica Minolta DiMAGE E201 - Manual (Page 42)

- 42 -
TAKING PICTURES
The IR Remote Control RC-3 allows remote camera operation up to 5m (16 ft.) away.
IR REMOTE CONTROL (SOLD SEPARATELY)
Place the camera on a tripod, and turn the
function dial to
to set the self-timer /
remote control mode.
Arrange the camera and subject to
compose the picture. Frame the subject
within the focus frame when setting up the
camera.
• Focus lock cannot be used with the IR
remote control.
Emitter window
Delay button
Release button
While pointing the emitter window of the
remote control unit toward the camera,
press the release button or the delay
button to take the picture.
• When the release button is pressed, the lamp
on the front of the camera will blink once
before the picture is taken.
• When the delay button is pressed, the lamp
on the front of the camera will blink for two
seconds before the picture is taken.
• The remote control may not operate with
backlit subjects or under fluorescent light.
Emitter window
Delay button
Release button