Konica Minolta DiMAGE E201 - Manual (Page 31)

- 31 -
CHANGING THE FLASH MODE
In recording mode, press the flash-
mode/delete button.
• The current flash mode appears alone on the
data panel with no other indicators.
• The flash-mode/delete button does not have
to be pressed and held , it simply needs to be
pressed once.
• The flash cannot be used or set in the
continuous-advance or movie-recording
modes.
Press the scroll ( ) buttons until the
desired flash mode is displayed on the
data panel or LCD monitor
• Pressing the scroll-up ( )button will cycle
through the flash modes in the order
illustrated.
• Pressing the scroll-down ( ) button will
cycle through the flash modes in reverse
order.
To set the flash mode, press the flash-
mode/delete button or press the shutter-
release button partway down.
• If no operation is made, the displayed flash
mode will be automatically set.