KVH Industries antenna system - Manual (Page 91)

54-0376
10.10
10-4 System Status Lights
Three status lights on the front of the receiver
indicate the current status of the system and can help
you identify problems.
During normal operation, all three status lights
should be lit green. The following tables explain what
the different light conditions indicate.
TracVision Mobile Receiver User’s Guide
System Status Lights
Light is... Indicates Description
Off Off Receiver is OFF (power switch is off) or no power input
Green OK Good power (between 10-16 VDC at receiver)
Green, flashing Cable Open Open detected in antenna cable (check antenna coax connection)
Orange Low Power Low power (between 8-10 VDC at receiver)
Red, flashing Bad Power Insufficient power (less than 8 VDC or more than 16 VDC input)
VOLTAGE Light Indications
If multiple receivers are connected, the
ANTENNA light on secondary receivers will
remain off at all times. Only the primary
receiver can monitor antenna status.