KVH Industries antenna system - Manual (Page 82)

9-6 Changing the List of Available
Satellites
If your antenna system supports multiple satellites,
you can choose which satellites will be active for your
system. Follow the steps below to add or remove
satellites from the list of supported satellites.
1. Using your primary receiver, press the MENU
button to access the main menu.
2. Highlight the System Setup tab and press
SELECT.
3. Highlight the Install tab.
4. At the Antenna Setup pane, highlight the Choose
Satellites
button and press SELECT.
5. At the pop-up menu, highlight one of the
satellites that you want to add or remove.
6. Press SELECT to add or remove the check mark
next to the satellite’s name. A check mark
indicates that the satellite is included in the list of
available satellites.
7. When you have selected all of the satellites that
you want in the list, highlight the OK button and
press SELECT.
54-0376
9.10
TracVision Mobile Receiver User’s Guide
Satellite Supported by Antenna
101.0
110.0
119.0
72.5
Antenna Setup
Antenna Setup