KVH Industries antenna system - Manual (Page 77)

9-3 Turning the Beeper On/Off
The TracVision receiver beeps to indicate the status of
the antenna.
2 beeps = Antenna is powering on
1 beep = Antenna is powering off
If you prefer, you can silence (turn off) the beeper.
Follow the steps below if you need to turn the beeper
on or off.
1. Press the MENU button to access the main menu.
2. Highlight the System Setup tab and press
SELECT.
3. Highlight the Antenna tab.
4. Highlight the Modify Settings button and press
SELECT.
5. If you want to turn on the beeper, highlight
Beeper On
. If you want to turn off the beeper,
highlight Beeper Off. Then press SELECT.
54-0376
9.5
Antenna Controls
Antenna
Antenna Controls
Current Settings
Diagnostics
Modify Settings
Sat Select
Model ID : 1
Model : TVR6
Version : 1.4
Tuning Delay : 0
Antenna Capabilities : Multisat
Two-way
Antenna Settings
Cancel
Antenna
DewShield Auto
DewShield Off
Beeper On
Beeper Off
Set Primary
Set Secondary
Show Serial #s
Show SW Version
Set to Defaults
Change Settings – Beeper