Connecting the ac adapter, Turning on the scanner, Disconnecting the scanner – Konica Minolta IV User Manual
Page 17
17
1. Connect the output plug of the AC
adapter to the scanner’s DC terminal.
2. Plug the AC adapter into a standard
household outlet.
Connecting the AC adapter
Confirm the front door of the scanner is
closed; the scanner is unable to initialize if
the door is open. Turn on the scanner with
the power switch. Start up the computer.
When launching the DiMAGE Scan Utility,
the indicator lamp (1) blinks when the
scanner is initializing. Once the indicator
lamp glows steadily, the scanner can be
used.
Turning on the scanner
Power switch
2
1
Quit the DiMAGE Scan Utility. Confirm that the scanner indicator lamp
is not blinking. Turn the scanner off and then disconnect the cable.
Never disconnect the scanner when the indicator lamp is
blinking.
Disconnecting the scanner
1