Kohler Aegis TP-2509 - Manual (Page 76)

9.4
Section 9
Disassembly
2. Disconnect the fuel lines at the inlet of the
carburetor, and the in-line fuel filter. See Figure 9-11.
Figure 9-11. Removing Fuel Line at Carburetor.
3. Remove the two hex. flange screws securing the
fuel pump to the blower housing and remove the
pump and lines as an assembly. Slide the fuel line
out of the clip attached to mounting stud. See
Figure 9-12.
Figure 9-12. Removing Fuel Pump.
Remove Air Cleaner Base
1. Disconnect the breather hose from the air cleaner
base. See Figure 9-13.
Figure 9-13. Removing Breather Hose from Air
Cleaner Base.
2. Remove the two hex. flange nuts securing the air
cleaner base assembly to the carburetor studs.
See Figure 9-14.
Figure 9-14. Removing Air Cleaner Base.
3. Remove clamp and air cleaner base (with
element) from the studs.