Kohler Aegis TP-2509 - Manual (Page 65)

8.15
Section 8
Electrical System and Components
8
Lever
Solenoid
CE Frame
Bolt
Ring
Stop
Drive
Armature
Washer
11. Remove the retainer from the armature shaft.
Save the stop collar.
NOTE: Do not reuse the old retainer.
Figure 8-22. Removing Retaining Ring.
12. Remove the drive pinion assembly from the
armature.
13. Clean the parts as required.
NOTE: Do not soak the armature or use solvent
when cleaning. Wash and dry/clean using a
soft cloth, or compressed air.
Figure 8-23. Delco-Remy Starter.
Screw
Plunger
Spring
Plate
Collar
Tube
Screw
Plug
Frame & Field
Brush Holder
Nut