Kohler Aegis TP-2509 - Manual (Page 63)

8.13
Section 8
Electrical System and Components
8
Delco-Remy Starters
Figure 8-13. Removing Solenoid Screws.
Figure 8-14. Solenoid Removed from Starter.
3. Lift and unhook the plunger assembly from the
drive lever. Remove the gasket from the recess in
the housing. See Figure 8-15.
Figure 8-15. Removing Plunger.
4. Remove the two thru (larger) bolts. See
Figure 8-16.
Figure 8-16. Removing Thru Bolts.
Figure 8-12.
Starter Disassembly
1. Remove the hex. nut and disconnect the positive
(+) brush lead/bracket from the solenoid terminal.
2. Remove the three screws securing the solenoid
to the starter. Remove the solenoid and plunger
spring from the drive end cap. See Figure 8-13
and 8-14.