Appendix b software environment, Appendix b. software environment, Appendix b, software environment – Symbol Technologies VRC 6940 User Manual
Page 82
![background image](/manuals/153945/82/background.png)
B-1
Appendix B Software Environment
This section describes the software environment for a VRC 6940 terminal. A VRC 6940 has
four drives as described in
Table B-1. VRC 6940 Drives
Drive
Size
Type
Contents
A:\
256 Kb
Flash,
EPROM
This drive contains:
• BIOS, including the Command Mode menus and
commands and Self-Test software
• Essential system drivers
• DOS
B:\
256 Kb
Flash,
EEPROM
This drive is the main space for user applications. For
the first installation, it contains the LWP hex image.
The first time you boot a terminal, LWP copies utilities
and applications onto the E:\ drive. When you load
user applications onto the terminal, they overwrite
LWP, but the utilities and applications stay on the E:\
drive.
See Chapter 4 for information on loading applications
into this space.
D:\
160 Kb
RAM
This drive contains the
net.cfg
file and user space.
Commands in the
b:\autoexec.bat
file can write
files to this disk.
The default size is 160 Kb, but this size can be changed
by
b:\init.exe
. For information on setting the D
drive size, see Chapter 5 of the Series 3000 Application
Programmer’s Guide (p/n 70-16308-XX).