Symbol Technologies VRC 6940 - Manual (Page 55)

6-10
VRC 6940 Product Reference Guide
7. Select a range of RAM to transfer. Press the UP and DOWN arrows to select an
option ( All , Range or None ) and press ENTER. If you select All , the program
skips to the summary screen. Continue at step 10.
Figure 6-4. Selecting a Range of Memory to Transfer
8. Specify a range of RAM by setting Start and End addresses. Use LEFT and RIGHT
arrow keys to move the cursor to a digit that you want to set. Use UP and DOWN
arrow keys to change the value. When the correct range appears, press ENTER.
Figure 6-5. Selecting a Range of RAM to Transfer
9. Specify a range of NVM to transfer. Use the arrow keys to select All or None , and
then press ENTER.
Figure 6-6. Selecting a Range of NVM to Transfer
RAM
Select Option
All
RAM
Use arrow keys
Start End
00000 9FFFF
NVM
Select Option
All