Symbol Technologies VRC 6940 User Manual

Page 28

3-5

Configuring Spectrum24

4. When you finish setting Spectrum24 parameters, warm boot the terminal:

a. Press the ON/OFF key to suspend the terminal.

b. Press and hold the SHIFT and L keys.

c. Press and release the ON/OFF button.

d. Release the SHIFT and L keys.
" The terminal reloads the system drivers and attempts to associate with a

Spectrum24 AP.

" If the radio card is configured correctly, it tries to locate a bootp server, fails, and

boots to a DOS prompt. This means the radio card is working correctly. Proceed
to step 5.

" If the radio card is not configured correctly, the CFG24 Configurator utility

reappears. Recheck your configuration parameters and perform another warm
boot.

5. Turn the VRC 6940 off.

You have successfully configured the Spectrum24 radio card. You may now
download and install application programs. See