beautypg.com

F macro definitions form, Macro definitions form, Appendix f – Siemens SIMATIC TIWAY 1 User Manual

Page 207

background image

UNILINK HOST ADAPTER

F–1

USER MANUAL

APPENDIX F

MACRO DEFINITIONS FORM

Table F–1 is a worksheet for planning macro buffer requirements. The labels at
the top match the macro definitions with the particular network and adapter.
They are:

Network

Enter the name used to describe the network with this

Name

adapter.

Location

Enter the location of the network and/or the adapter. This could be
the department in a plant, a plant, or any other definition.

UNILINK

The address or other identifier that specifies this adapter.

Host
Adapter

The form columns are

Macro

Enter the buffer number returned by the ALLOCATE

Buffer

MACRO STORAGE BUFFERS command which numbers

Number

the buffers sequentially beginning with 01 hex.

Command

Enter the length in bytes for the macro command buffer.

Buffer
Length

Response

Enter the length in bytes for the macro response buffer.

Buffer
Length

Source Id

Enter the Source Id associated with this macro.

Secondary

Enter the secondary device address associated with this

Address

macro.

Macro

Enter the type code for this macro:

Type

01 = Send Primitive
02 = Connect Secondary Device
03 = Disconnect Secondary Device

Primitive

Enter the primitive code from the secondary device manual or the
TIWAY I Systems Manual.

Auto

Check this box if the macro should be automatically

Enable

enabled.

Rept.

Check this box if the macro is to be a repetitive macro.