Siemens HiPath 4000 User Manual
Page 74
Alphabetical Reference
Description of functions
74
Minimal Session Length
•
for QDC (QoS Data Collection)
•
Standard value
National Dial Prefix
•
Only configurable on optiPoint 410/420 standard/advance and only re-
quired if a display module or application module will be used.
•
Canonical format
Non-Compressing Codec Threshold Values
•
Non-Packed
•
Observation Interval
•
For each observation intervall a threshold exceeding will be checked.
•
Standard value
Packet Size
•
The packet size will be expressed in time units. Available are the values
Auto, 10 ms und 20 ms.
•
Standard value
Phone Identity
•
Displays the Phone Identity of the optiPoint 410/420.
PING Test
•
Conduct a
Æ PING test to check whether a server or another terminal
device (e.g., the optiPoint 410/420) can be reached in the network.
Available Addresses:
– User specified IP
– Gateway address
– Default route
– Route 1 Gateway
– Route 2 Gateway
– SNMP address
– DLS address
– QCU address
•
Æ IP address as the test target, the connection to
which you wish to test.