Siemens HiPath 4000 User Manual
Page 69
Description of functions
Alphabetical Reference
69
LAN Port Settings
•
Here you must define the bandwidth at which the optiPoint 410/420
should be run. The required value depends on the bandwidth that the
switch or router supports in the network.
•
A restart is necessary after the change.
Language
•
Configurable on optiPoint 410/420 standard/advance only.
•
Select the language that should be used for local applications here.
•
Available languages: English, German, French, Italian, Spanish, Portug-
ese, Dutch.
•
Standard value
LDAP Server IP Address
•
Only configurable on optiPoint 410/420 standard/advance and only re-
quired if a display module or application module will be used.
•
If an
Æ LDAP server is being used, enter the Æ IP address of this serv-
er here.
LDAP server Port
•
Only configurable on optiPoint 410/420 standard/advance and only re-
quired if a display module or application module will be used.
•
If an
Æ LDAP server is being used, enter the Æ Port number here for
communication with this server.
•
Valid values: 1 ... 65535.
Bandwith
Possible application
Auto
in standard case
10/Full
in 100 Mbit networks in full duplex
[[1]]
process
[1] Up to a date, the data can be simultaneously transmitted and received.
10/Half
in 10 Mbit networks with half duplex
[[2]]
process
[2] Up to a date, the data can only be transmitted or received.
100/Full
in 100 Mbit networks in full duplex
[1]
process
100/Half
in 10 Mbit networks with half duplex
[2]
process