Siemens PC 670 - Manual (Page 69)

Maintaining and Extending the Computing Unit Release 04/02
4-9 Panel PC 670 Computing Unit, Equipment Manual
!
Caution
The electronic components on the printed circuit boards are extremely sensitive to
electrostatic discharge. Certain precautionary measures, therefore, have to be
taken when handling them. These measures are explained in the guidelines for
electrostatically sensitive devices in Appendix B.
Installing the SO DIMM Modules
To insert the modules, perform the following steps:
1. Open the unit first as described in section 4.1.
2. Insert the modules into the sockets. Note the cutout (locking element) on the
connector side of the SO DIMM module.
3. Press the module down applying light pressure until it locks into place.
4. Close the device.
!
Caution
Danger of damage!
The modules must be fitted firmly in the slots, otherwise they might fall out and be
damaged.
Installation
The memory capacity is detected automatically. When you switch on the device,
the distribution of base and extended memory is displayed on the screen.