Sanyo PCS Vision PM-8200 - Manual (Page 220)

Assigning Downloaded Ringers
You can assign downloaded ringers directly from the Downloads
menu or through your phone’s Settings menu.
To assign a downloaded ringer from the Downloads menu:
1. Press to access the main menu.
2. Select Downloads and press .
3. Highlight Ringers and press .
4. Highlight a downloaded ringer and press .
5. Highlight Assign and press .
6. Highlight Voice Calls, Voicemail, Messaging, Calendar,
Start-up Tone, Power-off Tone or Phone Book and press
.
The following two items need an extra step:
Ⅲ Voice Calls requires you to highlight With Caller ID or
No caller ID and press
.
Ⅲ Phone Book requires you to highlight the Contacts entry you
want to assign and press
.
(A message appears confirming that the ringer has been assigned.)
To assign a downloaded ringer from the Settings menu:
ᮣ See “Selecting Ringer Types for Voice Calls” on page 35;
see “Selecting Ringer Types for Voicemail” on page 37;
see “Selecting Ringer Types for Messages” on page 38;
see “Selecting Ringer Types for Calendar” on page 38;
see “Setting a Start-up/Power-off Tone” on page 39;
– or –
see “Selecting a Ringer/Image Type for an Entry” on page 93.
Note: You may assign a ringer to more than one type of call.
Purchasing Ringers
You can purchase ringers directly from your phone by following the
instructions on page 207 or through
www.qwestwireless.com .
Section 3B: Sprint PCS Vision 208