Sanyo PCS Vision PM-8200 - Manual (Page 133)

Using Voice-Activated Dialing
With your Sanyo SCP-8200, you can use a voice dial tag to
automatically dial a phone number in your Contacts. (A voice dial tag
is a command you record and use to place calls without using the
keypad.) Your phone can store up to 30 voice dial tags. (To create a
voice dial tag, see “Adding a New Contacts Entry” on page 87 or
“Editing a Contacts Entry’s Phone Number” on page 91.)
Making a Call Using Voice-Activated Dialing
To use a voice dial tag to call a phone number:
With the flip open:
1. Press or briefly.
2. Follow the voice prompts and recite the entry’s Voice Dial tag
into your phone’s microphone.
With the flip closed:
1. Press and hold .
2. Follow the voice prompts and recite the entry’s Voice Dial tag
into your phone’s microphone.
Note: To use the Voice Dial function, you must have a stored entries for Voice Dial
(see “Programming Voice Dial Tags” below).
Programming Voice Dial Tags
To program a voice dial tag:
1. Press to access the main menu.
2. Select Voice Services and press .
3. Select Voice Dial and press .
4. Select Program and press .
5. The phone will prompt you to say the name you want to
program. Wait for the beep and then say the name.
6. Respond to the prompt by repeating the name after the beep.
Section 2I: Using Your Phone’s Voice Services 121