Sanyo PCS Vision PM-8200 - Manual (Page 146)

Making a Ready Link Call (Group Call)
You can make a Ready Link call to all members in a Group entry,
which you have in your Ready Link List. You can communicate with
up to five members at a time.
To place a Ready Link Group call:
1. Press R-Link (left softkey) or press to access the Ready Link
List.
2. Press Go to (left softkey), highlight Personal Groups, and
press .
3. Highlight the group you want to call, and press and hold to
place the call and take the floor. (You will see R-Link calling... and
Connecting... followed by “You have floor.” Continue with the
Ready Link call as described on the previous page.)
Ⅲ To display a group member’s details, press , highlight
your desired group member, then press View (left softkey)
during step 3 above. Press
to make a Ready Link call to
the member.
Ⅲ If one of the group members takes the floor, you will see the
member’s name and Ready Link number on the display. The
phone beeps if you press the Ready Link (Memo) button
when another contact has the floor.
4. When the call is finished, press .
Tip: You can also make a Group Call after checking the group member. Press
to display group members, highlight and press and hold during
step 3 above.
Section 2J: Using Ready Link 134