Sanyo PCS Vision PM-8200 - Manual (Page 148)

Receiving a Ready Link Call (1-to-1 Call)
1. Make sure your phone’s Ready Link mode is enabled (see
“Setting Ready Link Mode” on page 130).
2. When you receive a Ready Link call from a contact, “R-Link
Call,” the contact’s name, and the Ready Link number appear on
the display. (You do not need to take any action to answer the
call.)
3. If the person placing the call has kept the floor (held the
Ready Link [Memo] button), you will see the contact name and
Ready Link number along with “has floor.”, and you will hear the
caller speaking.
4. When the caller finishes speaking and releases the Ready Link
(Memo) button, you will see “Floor is open.” on the display
screen. Press and hold
to take the floor and reply to the
caller. (You will see “You have floor.” and hear a tone confirming
that you may speak.)
5. When the conversation is finished, press .
Receiving a Ready Link Call (Group Call)
1. When you receive a Ready Link call from one of the group
members, “Group Call,” the group member’s name, and the
Ready Link number appear on the display.
2. Continue with the Ready Link call as described previously.
3. When the conversation is finished, press .
Section 2J: Using Ready Link 136