Siemens Hicom 300 E - Manual (Page 80)

Step by Step
Making multiline and team calls
80 80 80 80
Cancelling the fixed call forwarding
destination
Precondition: The telephone is in the idle state. A fixed
forwarding destination has been saved (
Æ page 79).
Only if it is not your primary line:
Press the line key for the required line.
Press the key. The lamp lights up .
The settings for fixed forwarding for every line are iden-
tical with the call forwarding function described above.
Therefore, for all fur ther steps see
Æ page 56.
Deactivating call forwarding for a line
Precondition: The telephone is in the id le state. After a
line key has been pressed, an activated call forwarding
function is indicated on the display.
Only if it is not your primary line:
Press the line key for the required line.
With the call forwarding key:
Press the key. The lamp goes out.
Via the Service Menu:
Press the key. The lamp lights up .
;>
Enter the service code.
or
Select and confirm.
Select and confirm.
Confirm.
For further information see Æ page 56
Line
Ser vice Menu
Line
Call for warding
Ser vice Menu
Switch es?
Call forwarding?
Deactivate?