Siemens Hicom 300 E - Manual (Page 63)

Forwarding calls
63 63 63 63
Step by Step
Checking/deactivating call forwarding
for another telephone
Press the key. The lamp lights up.
Select and confirm.
Select and confirm.
Confirm.
E
Enter the number of the other telep hone.
Confirm.
E
Enter the PIN
(only if your own station does not have the "Call forward-
ing for remote terminal" class of service).
Confirm.
To deactivate:
Confirm.
or To check:
Select and confirm.
Checking/deactivating call forwarding
for fax, PC or busy
Press the key. The lamp lights up.
Select and confirm.
Select and confirm.
Select and confirm.
E
Enter the code for the type of call forwarding required.
The codes are defined by System Suppor t. You can en-
ter your call forwarding codes in the following table:
Ser vice Menu
Switch es?
Forward station no.?
Variable call forw.?
Fin ished?
Fin ished?
Deactivate?
In terrogate?
Example of display:
This means: calls for station 3428 are redirected
to station 8968.
3428- --- --- --- --- --- --- --- ->8968
Ser vice Menu
Switch es?
Forward station no.?
Forward other?