Siemens Hicom 300 E - Manual (Page 54)

Step by Step
Forwarding calls
54 54 54 54
Forwarding calls
Using call forwarding
You can p rogram two types of call forwarding:
•
fixed forwarding, and
• variable forwarding
W ith fixed forwarding you can program a forwarding
d estination that will remain valid until you change or de-
lete it. This forward ing function can be switched on and
off.
W ith variable forwarding you can choose between 6 dif-
ferent types of forwarding:
•
Variable forwarding (unconditional forwarding)
• Forwarding for internal
• Forwarding for external
• Forwarding for busy
• Forwarding after time
• Forwarding for busy/after timeout
Call forwarding is activated when a forwarding destina-
tion is programmed. When the variable forwarding func-
tion is switched off, the forwarding destination is auto-
matically deleted
When forwarding is activated you can see the following
d isplay in the idle menu:
Fixed forwarding
If you have programmed a forwarding destination for
fixed forward ing , you can activate and deactivate the
forwarding facility either in the Service Menu or with a
Forwarding type Display message
Fixed forwarding
Variable forwarding
Forward ing to e.g. 222 Klaus
Meier (own number)
Forwarding for internal/
external Forward ing is on
Forwarding for busy No display message
Forwarding after time No display message
Forwarding for busy/af-
ter timeout No display message