Sun Microsystems X1150A User Manual

Page 57

Chapter 3

Network Configuration

Following are examples showing the usage of the boot net command line with
device parameters specified:

To attempt to force the link-up while advertising 100 Mbps full duplex capability to
the link partner:

To attempt to force link-up while advertising 1000 Mbps full duplex link-clock
master capibility to the link partner:

Note –

The link partner must be configured as link-clock slave.

To attempt to Auto-Negotiate the link while advertising 1000 Mbps full and half
duplex and link-clock auto capability to the link partner:

Note –

Link partner must Auto-Negotiate in order to link-up at 1000 Mbps.

# boot net:speed=100,duplex=full,

# boot net:speed=1000,duplex=full,link-clock=master,

# boot net:speed=1000,duplex=auto,link-clock=auto,