Become superuser, Verifying patches – Sun Microsystems X1150A User Manual

Page 34

Sun GigaSwift Ethernet Adapter Installation and User’s Guide • February 2003

▼

To Install Driver Software for Solaris 2.6
Operating Environments

1. Become superuser.

2. Insert the Sun GigaSwift Ethernet Driver 1.0 CD into a CD-ROM drive that is

connected to your system.

■

If your system is running Sun Enterprise Volume Manager™, it should
automatically mount the CD-ROM to the

/cdrom/cdrom0

directory.

■

If your system is not running Volume Manager, mount the CD-ROM as follows:

3. Install the software packages by typing the following at the command line.

Where sparc_arch is either

sparc.sun4u

sparc.sun4u1

for Sun Enterprise™

10000 systems.

Note –

The

sparc.sun4u1

contains the Solaris 2.6 packages only for Enterprise

10000 systems.

Verifying Patches

Verify whether your system has the needed patches for your version of the Solaris
operating environment to ensure that you do not need to add patches.

●

To verify patches for Solaris 2.6 and 7 operating environments, type the following.

The patch version should be -07 or greater.

# mkdir /cdrom

# mkdir /cdrom/cdrom0

# mount -F hsfs -o ro /dev/dsk/c0t6d0s2 /cdrom/cdrom0

# cd /cdrom/cdrom0/GigaSwiftEthernet/Solaris_2.6

# /usr/sbin/pkgadd -d

sparc_arch

/Packages all

# showrev -p | grep 112327