Installing the lights out management packages – Sun Microsystems SERVER 1290 User Manual
Page 59
Chapter 2
Setting Up
47
2. To power on the server, type
poweron.
Depending on the setting of the OpenBoot PROM
auto-boot?
parameter, the
server attempts to boot the Solaris Operating System (OS) or remains at the
OpenBoot PROM
ok
prompt. The default setting is
true
, which attempts to initiate
a boot into the Solaris OS. If the setting of
auto-boot?
is
false
or there is no
bootable Solaris image installed, then you the OpenBoot PROM
ok
prompt is
returned.
3. If necessary, install the Solaris Operating System.
See your Solaris installation documentation, which is available with your Solaris
release.
At the
ok
prompt, boot the Solaris OS by typing the OpenBoot PROM
boot
command:
For the optional device parameter, see the OpenBoot PROM
devalias
command,
which displays the predefined aliases.
After the Solaris Operating System is booted, the
login:
prompt is displayed.
Installing the Lights Out Management
Packages
Three LOM packages needed for a Netra 1290 server:
■
SUNWlomu
(LOMlite Utilities (
usr
))
■
SUNWlomm
(LOMlite manual pages)
■
SUNWlomr
(LOM drivers)
lom
>poweron
<
POST messages displayed here
. . . >
. . .
. . .
ok
ok boot [
device
]
login: