Sun Microsystems SERVER 1290 - Manual (Page 39)

Chapter 1 Unpacking and Installing the Server 27
1. Remove the hinge pin securing the pivot bracket to the upper CMA arm, which
facilitates attaching the bracket to the server chassis.
2. Secure the pivot bracket to the upper left-hand side of the server chassis using the
two captive screws. See FIGURE 1-20 and FIGURE 1-21 .
FIGURE 1-20 Upper and Lower Pivot Bracket Mounting Holes
After attaching the pivot bracket to the chassis, use the hinge pin removed
previously to secure it to the upper CMA arm.
Upper pivot bracket
mounting holes
Upper pivot
bracket
Lower pivot bracket
mounting holes
(hidden)
Lower pivot
bracket