Installing the cable management arm, Figure 1-17, Cma bracket mounting holes – Sun Microsystems SERVER 1290 User Manual
Page 36: Link active gbit link active gbit, Upper bracket holes lower bracket holes
24
Netra 1290 Server Installation Guide • May 2006
Installing the Cable Management Arm
This section contains the following topics:
■
“To Install the CMA–Lite” on page 25
■
“To Install the CMA–800” on page 26
The cable management arm (CMA) supports and protects cables when a server
slides into or out of a cabinet.
Two cable management arm solutions are offered – CMA-Lite and CMA-800. The
choice of CMA depends on the available depth in the cabinet and the quantity or
type of cable to be supported. Use the CMA-Lite if the larger CMA-800 management
arm does not fit your cabinet.
Threaded holes for attaching the CMA are provided on the rear of the server
(
).
FIGURE 1-17
CMA Bracket Mounting Holes
AC
3
AC
2
AC
1
AC
0
SOURCE
A
SOURCE
A
SOURCE
B
SCSI3
ALARMS
B
B
A
PCI 3
33MHz
PCI 1
33MHz
PCI 2
33MHz
PCI 4
33MHz
PCI 5
66MHz
PCI 0
33MHz
Link
Active
GBit
Link
Active
GBit
NET
0
NET
1
Serial A
Serial B
SSC1
SSC1
Upper
bracket holes
Lower
bracket holes