Woodstock M1013 User Manual
Page 15
-13-
M1013 Owner's Manual (Mfg. Since 6/09)
SE
TU
P
Figure 7. Installing right panel.
Figure 8. Installing bandsaw to cabinet.
8. Position the right panel between the front and rear
panel, and secure it in place with six M8-1.25 x 16
hex bolts, twelve 8mm flat washers, and six M8-1.25
hex nuts (see
Figure 7).
The Model M1013 is heavy! To
avoid personal injury, get help to
lift this machine.
9. With the help of an assistant or a hoisting device,
place the bandsaw onto the cabinet.
10. Secure the bandsaw to the cabinet with four M8-1.25
x 30 hex bolts, as shown in
Figure 8.