Siemens HIPATH 20 - Manual (Page 92)

Administration
A31003-O1010-M100-9-76A9, 05/05/2008
3-50 HiPath 8000 - OpenStage Family, Administration Manual
administration.fm
Features - Configuration
3.6.3 Call Transfer
3.6.3.1 Transfer on Ring
If this function is active, a call can be transferred after the user has dialled the third participant’s
number, but before the third party has answered the call. This feature is enabled or disabled in
the User menu. The default is "Yes".
Administration via WBM
(User) Configuration > Outgoing calls
Administration via Local Phone
3.6.3.2 Transfer on Hangup
This feature applies to the following scenario: While A is talking to B, C calls A. A accepts the
call, so B is on hold and the call between A and C is active. If Transfer on hangup is enabled,
and A goes on-hook, B gets connected to C.
If Transfer on hangup is disabled, C will be released when A hangs up, and A has the possibility
to reconnect to B.
The default is "No".
|
--- User
|
--- Configuration
|
--- Outgoing calls
|
--- Transfer on ring